|
NFK Glazing & Industrial Supplies |
|
|---|
Megapoxy 240 390g Kit
Megapoxy 240 – 390g Kit
Megapoxy 240 is a semi-rigid, amber-colored epoxy resin designed to remain soft after curing. This unique property allows for easy removal or re-entry. It is ideal for applications where adjustments may be necessary post-curing, such as fine-tuning floor spring tension in architectural hardware installations.
Packaging
Available in a 390g kit, it is suitable for small—to medium-scale applications requiring precision and the option of post-cure adjustments.
Key Features
- Re-Enterable After Curing: Remains rubbery, facilitating post-cure adjustments without compromising the integrity of the installation.
- Extended Working Time: Offers a generous pot life of approximately 2 hours at 25°C, providing ample time for mixing and application.
- Complete Kit: Supplied as a 390g kit, comprising both Part A (resin) and Part B (hardener), ensuring accurate mixing ratios and optimal performance.
Mixing and Application Instructions
- Preparation: Combine the entire contents of Part A with Part B.
- Initial Mixing: Stir the mixture thoroughly using a flat stirrer until a uniform consistency is achieved.
- Secondary Mixing: Transfer the mixture into a clean container and mix again to ensure complete homogenization.
- Application: Pour the fully mixed epoxy into the desired position.
Note: Neither component will cure independently; thoroughly mixing the correct proportions is essential for proper curing.
Technical Specifications
Mixing Ratio:
- By Weight: 1 part A to 3.3 parts B
- By Volume: 1 part A to 3.9 parts B
Viscosity (Mixed @ 25°C): 2500–2600 cps
Specific Gravity (Mixed @ 25°C): 0.987
Solids Content: 100% v/v
Pot Life: Approximately 2 hours
Cure Time: 24 hours
Shelf Life: 2 years when stored under recommended conditions
Safety and Handling
Wear appropriate personal protective equipment (PPE) during mixing and application.
Ensure adequate ventilation in the working area.
Avoid contact with skin and eyes; in case of contact, rinse immediately with plenty of water and seek medical advice if necessary.
Product Code: 19-051240
Category: Megapoxy
Related Products
Megapoxy 240 390g KitProduct Code: 19-051240 Category: Architectural Hardware / Hydraulic Door Closers / Megapoxy Weight: 0 Description:
Megapoxy 240 – 390g KitMegapoxy 240 is a semi-rigid, amber-colored epoxy resin designed to remain soft after curing. This unique property allows for easy removal or re-entry. It is ideal for applications where adjustments may be necessary post-curing, such as fine-tuning floor spring tension in architectural hardware installations. PackagingAvailable in a 390g kit, it is suitable for small—to medium-scale applications requiring precision and the option of post-cure adjustments. Key Features
Mixing and Application Instructions
Note: Neither component will cure independently; thoroughly mixing the correct proportions is essential for proper curing. Technical SpecificationsMixing Ratio:
Viscosity (Mixed @ 25°C): 2500–2600 cps Specific Gravity (Mixed @ 25°C): 0.987 Solids Content: 100% v/v Pot Life: Approximately 2 hours Cure Time: 24 hours Shelf Life: 2 years when stored under recommended conditions Safety and HandlingWear appropriate personal protective equipment (PPE) during mixing and application. Ensure adequate ventilation in the working area. Avoid contact with skin and eyes; in case of contact, rinse immediately with plenty of water and seek medical advice if necessary. |
|