NFK AL-Lube | Biodegradable cutting fluid for machining operations (MQL) on ferrous and non-ferrous metals

NFK AL-Lube is a biodegradable cutting oil specially formulated for complex machining operations on ferrous and non-ferrous metals: tapping, drilling, thread cutting etc.

Typical Properties

The advantages provided by the NFK AL-Lube lubricant are the following:

• A low viscosity allowing a good relief of metal chips when applied through micro-lubrication and micro-spraying systems
• Optimised lubrication at the edge of the cutting tool
• No toxic or irritant compounds - free of chlorinated and phenol derivates, etc.
• A formulation based on biodegradable synthetic and natural oils with a high flash point in order to decrease friction and avoid the problems of tool wear due to a rise in temperature at the contact between tools and machined parts.

Packaging options 1L, 5L, 30L

Technical details and applications:

NFK AL-Lube, doped with extreme pressure and anti-wear additives, is suitable for machining ferrous and non-ferrous metals, carbon steel, alloyed and stainless steel, alloyed copper, aluminium and its alloys. It is particularly recommended for micro-spraying systems. 

NFK Al-Lube should be used undiluted.

All information related to safety, hygiene, and transport are indicated in SDS