V2 GENERAL PURPOSE GLAZING SILICONE | Acetic cure, high modulus silicone sealant

V2 is an acetic cure, high modulus silicone sealant suitable for general glazing and some specialty glazing purposes. It cures by absorption of atmospheric moisture for a flexible and durable elastomeric seal.

• High modulus; acetic cure.
• Superior adhesion to a broad range of building materials; meets the currently accepted standard for glazing.
• Non-slumping formula
• Long life reliability
• Excellent natural ageing stability – maintains elastomeric properties even under harsh conditions and temperature extremes.

APPLICATIONS 

• Frameless shower screens
• Structural glazing (glass to glass application)
• Fin glazing
• Butt glazing
• General glazing application
• Toughened glass assemblies
• Aquariums
• Fibreglass applications

APPLICATION 

1. Surfaces to be sealed must be clean, dry and free of wax, grease, cutting oils or any loose of flaking materials. Use the two-wipe process for impervious substrates. Ensure the clothes are clean and changed frequently, and use a suitable cleaner/solvent such as IPA or 100% White Spirits.
2.  When extruding the sealant cut the nozzle to the desired width, cut the tip off the cartridge, and apply the sealant firmly to ensure good contact between the sealant and the substrate.
3. Before the sealant has skinned, tool it off to ensure a good finish, and to improve the wetting out of the sealant to the substrate.
4. Clean / wipe off excess sealant with a clean cloth or polyethylene scraper. Masking tape can be used. (Masking tape must be removed before skin-over starts).